360 Stabilizer Bracket for Ultrex

Tired of your expensive 360 transducer bouncing while your running down the lake or while your rolling down the road? Fix that with our 360 Stabilizer Bracket! A bushing on the inside of the bracket allows the trolling motor to spin freely while supporting the 360 transducer. 

**If you have another transducer cable and/or Hydrowave cable running down the shaft of your trolling motor, you can align that cable in the groove on the shaft and the stabilizer bracket will hold that in place**

**If your transducer cable is too large in diameter or you are running multiple cables, you can run the cables on the outside of the bracket and leave enough slack for the cables to turn with the trolling motor shaft**

**If you are mounting onto a setup with Humminbird TargetLock make sure to select the "TargetLock or 360 - Ultrex 2" Variant. The regular will NOT FIT.**

**If you have a Humminbird Ultrex 2 Mega 360, you will need to select the "TargetLock or 360 - Ultrex 2" Variant as the new bracket is longer than the original bracket.**

** DOES NOT FIT ULTREX QUEST **